Kenmore 75132 Manuel du propriétaire Page 8

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 40
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 7
8
6. Press and hold PUSH to START
to begin cycle
Press and hold the PUSH to START button to begin the cycle.
Promptly remove items after cycle has completed to
reduce wrinkling. Use the Wrinkle Guard™ option to avoid
wrinkling when you are unable to remove a load from the
dryer as soon as it stops.
4. Set cycle options
Select the cycle options by turning the knob to the desired
position.
NOTE: Not all options and settings are available with all cycles.
Wrinkle Guard™ option
Get up to 40 minutes of heat-free, periodic tumbling at the end
of a cycle. Turn the WRINKLE GUARD™ knob to select ON or
OFF at any time before the cycle has ended.
Dry Temp
Turn the DRY TEMP knob to change the drying temperature
setting. See “Setting the Drying Temperature.”
3. Select the desired cycle
Select the desired cycle for your load. See the “Cycle Guide
for more information about each cycle.
Auto Moisture Sensing™ cycles
You can select a dierent dry level, depending on your load,
by turning the knob to More, Normal, or Less.
Selecting More, Normal, or Less automatically adjusts the
dryness level at which the dryer will shut o. Once a dry level
is set, it cannot be changed without stopping the cycle.
Auto Moisture Sensing™ cycles give the best drying in the
shortest time. Drying time varies based on fabric type, load size,
and dryness setting.
NOTE: More Dry removes more load moisture. Normal Dry is
used for a starting point for Auto Moisture Sensing™ cycles.
Choose normal to save energy. Less Dry removes less moisture
and used for loads you may want to put on a hanger to
complete drying.
5. Select Cycle Signal, if desired
Turn the CYCLE SIGNAL knob to select the desired setting (On
or O). The Cycle Signal produces an audible sound when the
drying cycle is nished. Promptly removing clothes at the end
of the cycle reduces wrinkling.
NOTE: When the Wrinkle Guard™ option is selected and the
Cycle Signal is on, the tone will sound every 5minutes until the
clothes are removed, or the Wrinkle Guard™ option ends.
Vue de la page 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 39 40

Commentaires sur ces manuels

Pas de commentaire