Kenmore 7.2 cu. ft. Double-Oven Electric Range - Stainless Steel Manuel du propriétaire Page 24

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 34
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 23
24
Setting Oven Controls
To Start Self Clean
The Self Clean key controls the self clean feature. If you are
planning to use the oven directly after a self clean cycle
remember to allow time for the oven to cool down and the oven
door to unlock. This normally takes about one hour. A 3 hour self
clean cycle will take about 4 hours to complete. It is recommend
to use a 2 hour self clean cycle for light cleaning, a 3 hour cycle
for average cleaning, 4 hours for a heavy cleaning.
When the self clean cycle is over, stand to the
side of the oven when opening the door to allow hot air or
steam to escape. Do not force the oven door open. This can
damage the automatic door locking system. Use caution and
avoid possible burns when opening the door after the self
cleaning cycle has completed. The oven may still be very hot.
To start an immediate 3 hour self clean cycle:
1. Be sure clock is set for correct time of day and door is
closed.
2. Press Self Clean. CLEAN will flash and 3:00 will show in the
display. The oven will automatically clean for a 3 hour
period. Note: if a 2 or 4 hour clean time is desired, press 2
0 0 for 2 hour or 4 0 0 for a 4 hour clean time.
3. Press . The DOOR, LOCKED icon will flash and the
CLEAN icon and the letters CLn will remain in the display.
4. As soon as the control is set, the motor driven oven door
lock will begin to close automatically. Once the door has
been locked the DOOR LOCKED indicator light will stop
flashing and remain on. Also, the oven icon will appear in
the display.
Note: Allow 15 seconds for the oven door to lock.
Do not force the oven door open. This can
damage the automatic door locking system. Use caution when
opening the door after the self cleaning cycle is completed. The
oven may still be very hot.
Important: When one oven is set for a self clean, the other oven
will not be operational.
If at this time you wish to delay the self clean starting time,
follow steps 6 through 9:
5. Press Delay Start.
6. Enter the start time numbers 4 3 0 and press . CLEAN,
DELAY, LOCK, and DOOR will be displayed.
7. The control will start the self clean at the set delay start
time selected. At that time, the DELAY message will disap-
pear.
When the self clean is over:
1. HOT will appear in the display. The time of day, the DOOR
LOCKED and CLEAN icon will remain in the display.
2. Once the oven has cooled down for approximately 1 hour,
and the DOOR LOCKED icon is no longer displayed, the
oven door can then be opened.
Stopping or Interrupting a Self Cleaning Cycle
If it becomes necessary to stop or interrupt a self cleaning cycle
due to excessive smoke or fire in the oven:
1. Press .
2. The oven door can only be opened after the oven has
cooled down for approximately 1 hour and the DOOR
LOCKED icon is no longer displayed.
Note: If your clock is set for normal 12 hour display mode the
delayed self clean cycle can never be set to start more than 12
hours in advance. To set for delayed self clean cycle 12 to 24
hours in advance set the control for the 24 hour time of day
display mode.
Vue de la page 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 33 34

Commentaires sur ces manuels

Pas de commentaire