Kenmore 790.479 Manuel d'utilisateur télécharger pdf (Page 12)

Consumer Defined Control Features

Setting Temperature Display -- Fahrenheit or Celsius

The BROIL / and FLEX CLEAN @ pads control the Fahrenheit or Celsius temperature display modes. The oven

control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to

display in Fahrenheit. Note: both ovens will be changed at the same time.

iNSTRUCTiONS PRESS DISPLAY

To change display from Fahrenheit to Celsius or

Celsius to Fahrenheit

1. Press (_Broil_/and hold for 6 seconds. A beep will sound, "550"

will appear "UPPER" and "BROIL" will flash in the display

(Figure 1). After 6 seconds a beep will be heard and "F" (Figure

2) or "C" (Figure 3) will appear in the display.

If "F" appears, the display is set to show temperatures inFahrenheit

(Figure 2). If "C" appears, the display is set to show temperatures

in Celsius (Figure 3).

2. Press _ to switch between Fahrenheit or Celsius

display

modes. The display will show either "F" (Figure 2) or "C"

(Figure 3).

3. Press START_: to accept the change or press to reject the

change.

for 7seconds

Figure 1

Figure 2

or Q

Figure 3

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 35 36

Pas de commentaire

Kenmore 790.479 Manuel d'utilisateur Page 12